The E11-GEN is a dedicated generator-transformer block protection and control IED; the relay provides complex protection, control and monitoring functions for generator/step-up transformer blocks including the auxiliary transformer. It is a member of the DTRV product type in the EuroProt+ product family. The EuroProt+ family complex protection in respect of hardware and software is a modular device. Because of the modular architecture, the modules are assembled and configured according to the user’s requirements; from that point on, the software determines the functions.
The DTRV type is especially designed for protection and control applications of power transformers and generators including generator-transformer blocks. Additionally the DTRV product type includes variety of versatile protection functions to meet the user’s the most demanding requirements.
The EuroCAP configuration tool, which is available free of charge, offers a user-friendly and flexible application for protection, control and measurement functions to ensure that the IED-EP+ devices are fully customisable.
- Native IEC 61850 IED with Edition 2 compatibility
- Scalable hardware to adapt to different applications
- 84 HP or 42HP wide rack size (height: 3U)
- The pre-defined factory configuration can be customized to the user’s specification with the powerful EuroCAP tool
- Flexible protection and control functionality to meet special customer requirements
- Advanced HMI functionality via color touchscreen and embedded WEB server, extended measuring, control and monitoring functions
- User configurable LCD user screens, which can display SLDs (Single Line Diagrams) with switchgear position indication and control as well as measuring values and several types of controllable objects.
- Various protection setting groups available
- Enhanced breaker monitoring and control
- High capacity disturbance recorder (DRE) and event logging:
- DRE for up to 32 analogue and 64 digital signal channels.
- Event recorder can store more than 10,000 events.
- Several mounting methods: Rack; Flush mounting; Semi-flush mounting; Wall mounting; Wall-mounting with terminals; Flush mounting with IP54 rated cover.
- Wide range of communication protocols:
- Ethernet-based communication: IEC61850; IEC60870-5-104; DNP3.0 TCP; Modbus TCP
- Serial communication: DNP3.0; IEC60870-5-101/103; MODBUS, SPA
- The EuroProt+ family can handle several communication protocols simultaneously.
- Built-in self-monitoring to detect internal hardware or software errors
- Different time sources available: NTP server; Minute pulse; Legacy protocol master; IRIG-B000 or IRIG-B12X
The E11-GEN is designed to be the main or backup protection and control IED for synchronous power generator blocks including the step-up transformer and the auxiliary transformer. The relay is member of the DTRV product type in the EuroProt+ product family.
The E11-GEN relay includes variety of versatile protection functions along with the main differential protection, such as overcurrent, over-/undervoltage, frequency protections. The device contains several functions especially made for generator applications as well, e.g. thermal-based negative sequence overcurrent protection, voltage dependent overcurrent, inadvertent energizing protections, loss of excitation, 100% stator earth fault protection, rotor earth fault etc. It can be applied as a back-up protection relay for downstream equipment (e.g. feeders, cables etc.).
The E11-GEN generator-transformer block protection relay can support the double breaker terminals such as breaker and a half, or ring bus topologies. Synchro-check is also available.
The IED includes wide range of control and supervisory functions which provide full control and user defined interlocking schemes for the primary switchgear at the substation.
THE SCOPE OF APPLICATION
- Block differential protection with three ends
- Automatic phase shift and turns ratio compensation of the step-up transformer
- 2nd and 5th harmonics restraint for transformer inrush and overexcitation detection
- CT of the auxiliary transformer can be on either side
- Protections specifically made for generator applications
- Voltage dependent overcurrent protections
- Interturn fault protection for larger generators (current or voltage based, depending on the winding)
- Loss of excitation protection
- Pole slipping (out-of-step) protection
- Rotor earth fault protection for isolated/ungrounded or middle-grounded rotors
- Different kinds of 95% earth fault protections:
- Residual overcurrent (can be sensitive depending on the CT)
- Residual overvoltage
- Restricted earth fault
- 100% Stator earth fault protections:
- 3rd harmonic undervoltage
- 3rd harmonic differential overvoltage by measuring the residual voltage in the neutral and the terminal point (two operation modes if generator CB is present)
- Restricted earth-fault protection
- The implemented protection functions provide back-up protection for downstream equipment (e.g. feeders, cables etc.).
- Independent trip logic and circuit supervision for each trip circuit (circuit breaker, excitation, turbine valve etc.)
- Support for the double breaker terminals such as breaker and a half, or ring bus topologies
- Supervision of current and voltage transformers
- Programmable interlocking schemes
- Optional external unit:
- Remote I/O unit (RIO)
- Optional transducer I/Os (RTD/mA)
The E11-GEN configuration measures three phase currents from three sides of the generator-transformer block (neutral side of the generator, HV side of the step-up transformer and either side of the auxiliary transformer), the residual current(s), three phase voltages of the generator, residual voltage(s). The main protection functions are the generator (block) differential protection, overcurrent, voltage dependent overcurrent, frequency, loss of excitation and earth-fault protection functions. The additional protection functions are available to provide the necessary complexity according to the generator´s protection needs as well as back-up protections for downstream equipment (e.g. feeders, cables etc.).
|Hardware description||1.44||31/03/2022||4.23 MB|
|Operating Manual and Troubleshooting Guide||1.3||13/04/2021||2.50 MB|
|Protocol Implementation Extra Information - PIXIT||1.1||20/03/2017||259.27 KB|
|Protocol Implementation Conformance Statement - PICS||1.1||20/03/2017||261.09 KB|
|Model Implementation Conformance Statement - MICS||1.0||21/05/2012||864.71 KB|